STERNDORFF ENGINEERING
STRUCTURAL AND MARINE CONSULTANT

PREPARATION AND SUPERVISION OF MODEL TESTS

  • 2007.

    Supervision of model tests performed at Marintek for the Peregrino Field FPSO.

  • 2006.

    Supervision of model tests performed at Marintek for the Vincent Field FPSO.

  • 2005-06.

    Project Manager for model tests with the wave energy device “Bølgemøllen”.

  • 2002-03.

    Project Manager. Hydrodynamic model tests of the float-over installation of the topsides and docking installation of the jacket for the Azeri field in the Caspian Sea offshore Azerbaijan. Client: Saipem, Italy for AIOC, Azerbaijan.

  • 2001.

    Project Manager. Model tests for determination of hydrodynamic coefficients for wave-in-deck loading. The tests were performed in Grosse Wellen Kanal at FZK in Hannover, Germany as a part of the EU-TMR-LSF-Programme. Client: The Danish Energy Authorities.

  • 2000-01.

    Project Manager. Model tests for the design of a Tripod Catenary Mooring System for an FSO to be installed at 125 m water depth at the Chestnut field in the British sector of the North Sea. Client: Brovig Production Services Ltd., UK.

  • 2000.

    Project Manager. Model tests for the design of a Tripod Catenary Mooring System for an FPSO to be installed at 75 m water depth at the Isis field offshore Tunesia. Client: Brovig Production Services Ltd., UK.

  • 1998.

    Quality Assurance. Model testing of a side-by-side floating gas storage and offloading system for Bayu-Undan. Client: BHP Petroleum, Australia.

  • 1997-00.

    Supervision of researchers conducting model tests in the 3-D offshore basin at DHI during the EU-TMR-LSF Programme. Client: European Commission.

  • 1997.

    Project Manager. Hydraulic model tests for determination of the flow resistance of bridge piers and protective islands for the Øresund Bridge. Client: Øresundskonsortiet.

  • 1996-97.

    Project Manager. Hydrodynamic model tests of the float-over installation of a 20,000 dwt integrated deck structure from a barge to a jacket. Client: Saipem, Italy.

  • 1996.

    Project Manager. Model test for the design of a data transmission buoy for radio transmission of metocean data from an offshore site to DHI.

  • 1996.

    Project Manager. Hydraulic model testing of the transportation and installation of the tunnel elements for the Øresund Link. Client: Øresund Tunnel Contractors A/S.

  • 1995-96.

    Quality assurance for the model testing of a side-by-side offshore loading system for LPG for the N’Kossa Field Offshore Congo. Client: Anchor Storage Ltd.

  • 1994-95.

    Supervision of various research teams during testing in the 3D offshore facility at DHI during the Large Scale Facilities programme. Client: The EU.

  • 1994.

    Project Manager. Model tests for determination of the dynamic response of mono-tower platform to non-linear wave loading. Client: Ministry of Energy, Denmark.

  • 1993.

    Project Manager. Model tests to determine the feasibility of ROLF – a novel flexible riser system for loading of oil offshore. Client: Shell Expro, Aberdeen.

  • 1992.

    Lead Engineer on the lifting test for the jacket structure and the lifting and transportation tests for the topsides structure for the Dunbar jacket and topsides. Client: AMEC Engineering.

  • 1990.

    Project Manager. Model tests for verification of numerically computed non-linear hydrodynamic forces on floating structures. The tests were performed as a part of the research project Rational procedures for advanced non-linear analysis of floating structures (BRITE project P-2146) Client: European Commission.

  • 1989.

    Project Manager. Model tests for determination of hydrodynamic loads on typical jacket joints in steady flow.

  • 1989.

    Project Manager. Model tests for determination of hydrodynamic loads on a jacket in waves.

WELCOME TO STERNDORFF ENGINEERING APS


Sterndorff Engineering provides solutions for advanced technical problems and performs research and development within the field of structural and marine engineering.

The solutions are founded on profound knowledge based on many years of experience and research and development within the area.

The problems may be solved in close co-operation with other consulting engineers and researchers throughout the World.

Sterndorff Engineering was founded by Dr. Martin J. Sterndorff in 1988 as a part-time consultancy. In 2004 the company was changed to a small limited company and Dr. Sterndorff started to work full time in the company.

STERNDORFF ENGINEERING APS
Tværledet 33
2880 Bagsværd

Telefon: +45 45 54 15 55
Email: martin@sterndorff.com
CVR nr. 27624707

Get directions